CNC folding machine is roughly divided into CNC gate type and CNC pendulum type. The so-called numerical control is mainly reflected in the rear gear material of the numerical control system. If the tool holder of the shearing machine is supported by a three-point rotating guide, a high-precision blade can be used. If the tool holder is cut under the arc, there are only two blades, low utilization rate, but easy maintenance.

1. After control: the ordinary shear machine is controlled by the motor and needs to be manually fine-tuned. CNC folding machine can be controlled correctly by servo motor.

2. Cutting gap adjustment: The ordinary cutting machine can adjust the gap by manually driving the fan teeth through the reducer encoder, and the thickness of the input board can be automatically adjusted to the appropriate gap.

The all-steel welded structure has sufficient strength and stiffness.

. Hydraulic transmission system safe operation, beautiful appearance.

The gap adjusting mechanism is fast and flexible, and the shear precision is high.

. Set light alignment device for easy cutting.

The rear gear controls the size and cutting of the material, and the number of cuts is a digital display device.

There are two main differences: 1. The cutting operation mode of the tool holder: single point support, the rear fulcrum moves arc curve according to the lever principle; Rolling track (lower eccentric shaft, front support shaft, upper eccentric shaft), tool holder linear movement. 2. Scope of use: the swing is an ordinary small and medium-sized working part, and the shear surface is an ordinary working part. The door is mainly used for medium shear plate with high shear section accuracy.